BoilerMate SP Pre-Plumbed
Mains pressure hot water thermal store for use with central plant boilers
The BoilerMate SP Pre-Plumbed offers a ‘plug n play’ solution, featuring a pre-plumbed kit to help reduce installation time and standardise plumbing configuration across multiple dwelling sites.
Part of the BoilerMate SP range, the BoilerMate SP Pre-Plumbed is the perfect partner for central plant heating systems. Its main benefits for the installer or the developer include:
-
Reduction in pipe size
-
Reduction in the central plant size
-
Built in diversity
- A fitting template to speed up installations
- No G3 qualification requirement for installation
The BoilerMate SP Pre-Plumbed thermal stores also provides the homeowner with:
-
Mains pressure hot water giving ‘power shower’ performance
-
A cylinder reheat time of approximately 20-25 minutes
- Allows for dry roof space eliminating the risk of freezing pipes/tanks in winter
- No annual maintenance or safety check requirement
-
Increased system efficiency, reducing running costs
Easy to install, the BoilerMate SP Pre-Plumbed can be fitted to existing systems, with no requirement for pipework oversizing.
As it is vented and therefore inherently safe, there is no requirement for a safety discharge, and therefore is not subject to G3 Building Control Regulations – thus simplifying installation and system maintenance enormously for the landlords or homeowners.
BoilerMate SP Pre-Plumbed models are designed to be fed directly from the mains. With the water being instantaneously heated via the plate heat exchanger, this removes any risk of legionella.